: | Sep 15, 2004 |
This procedure requires the body to be removed from the integrated body frame. |
In this procedure the front side member section is replaced in conjunction with hood latch panel, front wheelhouse and the front crossmember. |
. | Load vehicle onto ramp. |
. | Disconnect both the battery cables. |
. | L/H side: Remove the battery. |
. | Remove the front fender. |
. | Remove the hood latch panel. |
. | Remove the front wheelhouse. |
. | Remove the front crossmember. |
. | Remove the hood. |
. | Remove both hood support struts. |
. | Remove the hood wiring harness. |
. | Remove the plenum chamber panel. |
. | L/H side: Remove the power steering fluid
reservoir. |
. | Remove the instrument panel. |
. | Remove the insulation from outer and inner bulkhead. |
. | R/H side: Release the ABS modulator. |
. | R/H side: Remove the accelerator pedal. |
. | L/H side: Remove the battery junction box. |
. | Release the wiring Harness from bulkhead. |
. | Release the wiring harness from fender apron panel reinforcement. |
. | Release the wiring harness from the side member. |
. | L/H side: Remove the fuel fired booster heater.
|
. | Remove the scuff plate trim panel trim |
. | Remove the footrest |
. | Remove the cowl side trim panel. |
. | Release the front carpet. |
. | ||||||||||
|
. | For additional information:
|
. | Install is the reversal of removal. |